Website update notification: New changes live now!

Flysky  |  SKU: LA0028

Frsky RX8R PRO 2.4G ACCST 8/16CH Telemetry Redundancy Receiver with Sbus Port

$39.99


Description

Note:
When both the master and slave receivers go into failsafe, the failsafe signal from the master receiver will be output;
The slave receiver should be in no telemetry mode.

The FrSky RX8R Pro is an upgraded version of RX8R receiver that has all the same features including redundancy. The new RX8R Pro has higher precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. Another feature is new with the RX8R Pro is the reduction of interference caused by the ignition process.

Description:
Brand Name: Frsky
Item Name: RX8R PRO
Band: 2.4GHz ACCST
Channel: 16CH (1-8ch from conventional channel output, 1-16ch from SBUS port, or combine two RX8R to become a 16 channels receivers)
Dimension: 46.3mm x 26.6mm x 14.2mm (LラWラH)
Weight: 14.8g
With RSSI Output on Board: Analog 0-3.3V
Operating Voltage Range: 3.5V-10V
Operating Current: 100mA@5V
Operating Range: Full range (>1.5km)
Firmware Upgradeable
Compatibility: FrSky radios/transmitter modules in D8/D16 mode

Features:
Parallel two RX8R PROto become a 16 channel receiver
Smart Port enabled, realizing two-way full duplex transmission
Supports redundant transmission of two Tx modules in parallel (Sbus input: the signal from the slave receiver(Sbus receiver) for backup)

The Redundancy Function:
For the master and slave receivers, when the master receiver goes into failsafe, the output signal from the slave receiver will be used until the master receiver works again.

English Manual, Click Here

Package Included:
1x Frsky RX8R PROreceiver

 


Flysky

Frsky RX8R PRO 2.4G ACCST 8/16CH Telemetry Redundancy Receiver with Sbus Port

$39.99

Note:
When both the master and slave receivers go into failsafe, the failsafe signal from the master receiver will be output;
The slave receiver should be in no telemetry mode.

The FrSky RX8R Pro is an upgraded version of RX8R receiver that has all the same features including redundancy. The new RX8R Pro has higher precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. Another feature is new with the RX8R Pro is the reduction of interference caused by the ignition process.

Description:
Brand Name: Frsky
Item Name: RX8R PRO
Band: 2.4GHz ACCST
Channel: 16CH (1-8ch from conventional channel output, 1-16ch from SBUS port, or combine two RX8R to become a 16 channels receivers)
Dimension: 46.3mm x 26.6mm x 14.2mm (LラWラH)
Weight: 14.8g
With RSSI Output on Board: Analog 0-3.3V
Operating Voltage Range: 3.5V-10V
Operating Current: 100mA@5V
Operating Range: Full range (>1.5km)
Firmware Upgradeable
Compatibility: FrSky radios/transmitter modules in D8/D16 mode

Features:
Parallel two RX8R PROto become a 16 channel receiver
Smart Port enabled, realizing two-way full duplex transmission
Supports redundant transmission of two Tx modules in parallel (Sbus input: the signal from the slave receiver(Sbus receiver) for backup)

The Redundancy Function:
For the master and slave receivers, when the master receiver goes into failsafe, the output signal from the slave receiver will be used until the master receiver works again.

English Manual, Click Here

Package Included:
1x Frsky RX8R PROreceiver

 


View product