For ARRIS X220 220mm FPV racing drone, it comes with EMAX RS2306 2400kv high quality brushless motor,Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD board,5042 high efficiency propeller,Runcam swift 2 mini camera，5823S 5.8G 200mW 40CH mini video TX. The rest of the parts is optional. such as radio and receiver,goggle,battery and charger. If you choose the radio, the whole rtf will be assembled and tested before leaving the factory. For the goggle,if you choose Dominator V3 or HD3, you need to install the rx to the goggle when you receive it. For the rest goggles, turn on it and it will work with the drone.
The main feature of the ARRIS X220 is the "X" symmetrical design,high strength,simple structure,durable and agile, it is great for freestyling.This version is also called the professional version, because we just choose the best equipment for it.
Diagonal Wheelbase: 220mm
Flight Controller: F3 flight Controller
Frame Material: Pure Carbon Fiber
Camera: Runcam Swift 2 FPV camera
FPV TX: 5.8G 200mw 40CH
Antenna: 5.8G Antenna
Flying Time:about 10 minutes hovering
The ARRIS X220 comes with the chamfered edge design on the arm, which gives the quad a sleek look.It comes with 4mm pure carbon fiber plate arm, make the frame super strong.The ARRIS X220 is made of pure carbon fiber with alloy pats, the weight is quite light.The structure of the X220 is simple, it is easy to maintain.
Flycolor Raptor S-Tower comes with BLHei-S 4-in-1 ESC and F3,PDB and OSD. The ESC comes with EFM8BB21F16G MCU, support Dshot / Multishot / Oneshot,support high KV motor, can support at most 500k eRPM.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.
The default firmware of the F3 is betaflight,it supports PPM, PWM and SBUS remote control / receiving mode. Built-in current meter, OSD directly display the real-time current without any additional connection.
With the tower on the ARRIS X220, the wires are tidy and concise. And it is more convenient to maintain in the future.
Emax RS2306 2400KV Brushless Motors-As the latest fpv racing drone motor from Emax, the RS2306 2400KV motor upgraded larger stator with Japan NSK bearings, 0.15mm silicone steel laminations reduce eddy current loss. With the 1.8mm arc magnets, it shortens the motor start time, accelerates faster...
ARRIS 5042 propeller--It has bigger windward area, well balance and strengthen root, and the efficiency is 10% higher than normal propeller.
RunCam Swift 2 micro camera is the latest fpv camera released by Runcam for FPV racing drones. One of main feature of the Runcam swift 2 camera is the integrated OSD, with this, it can displays the input voltage of the camera or the battery voltage.And the angle is adjustable here.
ARRIS 5.8g 200mW 40-CH video TX pre-assembled.The The ARRIS TS5823L transmitter packs 200mW of ultra clean 5.8GHz power in a micro sized video/audio transmitter with LED display! The ARRIS TS5823L is transmitting a full range of 40 channels and only weighs 6.5g.
Aomway 5.8G 3DBi 4 Leaf Clover Antenna-The newest antenna has reinforcement around the clover leaf base for preventing unwanted damage, and now new cover (top piece only but is firm enough and keep weight light) is added to the package to protect antenna wires when installed on drones.
ARRIS X220 has integrated with a remote controller battery warning buzzer, pilot can set the threshold (adjustable)according to CF parameter-adjustment software. In addition, you can also locate your racing drone through triggering the buzzer with the switch D on the transmitter.
1 x ARRIS X220 FPV Racing Quad Frame
4 x EMAX RS2306 2400KV Brushless Motor
1 x Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD
4 x ARRIS 5042 3-blade Propeller
1 x Runcam Swift 2 FPV Mini Camera
1 x 5.8G 200mw 32CH FPV TX
1 x Aomway FPV Transmitter Antenna
1 x ARRIS Buzzer
2 x Battery straps
1 x Radiolink AT9S with R6DSM RX or Radiolink AT10II with R12DSM RX or Frsky QX 7 with X4R RX or Frsky X9D Plus radio with RX (Optional)
1 x 4S 1500mah Lipo Battery (Optional)
1 x Eachine EV800 FPV Goggle or Eachine Goggle Two goggle or Eachine VR D2 Pro goggle or Fatshark Teletorter V5 goggle or Fatshark Attitude V4 goggle or Fatshark Dominator V3 with FSV2446 RX or Fatshark HD3 with FSV2446 RX or Aomway Commander V1 Goggle or Skyzone SKY02S V+ Goggle (Optional)
1 x IMAX B6 Mini charger with adapter or IMAX B6AC V2 Charger (Optional)
Video by Sagnik Ghosh